Ready to upgrade your 2018+ Jeep Wrangler JL/JLU Stereo?
Here at are our shop in Brookfield, CT, we upgrade Jeep Wranglers stereos all the time – older TJ’s, JK’s and even the new JL body style. Jeep Wranglers are a blast to drive in the warmer months – top down, sun shining, doors off and wind blowing between your toes (don’t tell me you haven’t driven your Wrangler barefoot like this). Add a kick ass stereo to the mix and it adds a whole ‘nother layer of enjoyment to the cruising experience.
Whenever possible, I prefer to plan out a Jeep Wrangler JL stereo upgrade BEFORE my client has even purchased the vehicle. Luckily, most of my clients are repeat customers and they do actually reach out to me prior to buying a new car. Once you go aftermarket, you can’t go back. They know they’re going to upgrade the sound so they typically consult with me to know what options they’ll have prior to purchasing and sometimes this changes what package or options they get with their vehicle.
Through my experience I have found most clients have a common misconception. They assume that they should buy the base model since they plan on upgrading the stereo anyways. That used to be the true in our industry, but as technology has progressed, the method of upgrading stereos has changed. A new category has emerged which I refer to as “Pre-Amp Adapters”. For many newer vehicles on the market, there are these really cool pre-amp adapters available that allow us to simply pop out the stock premium amp and drop in an aftermarket amp (and aftermarket speakers) in its place. This enables us to fully upgrade the audio system without losing any functionality or control and while retaining the OEM head unit and user interface.
Jeep Wrangler JL Stereo Upgrade – which model radio is your JL equipped with?
Jeep offers several different radios and packages for the new Jeep Wrangler JL body style including:
- 5″ touch screen
- 7″ touch screen
- 8.4″ touch screen.
All of these models are offered with or without the factory premium sound option. If your model is equipped with the premium sound option, that makes upgrading the sound in your JL Wrangler a lot easier because it means you can use a pre-amp adapter.
Jeep Wrangler JL Stereo Upgrade – Using a pre-amp adapter
There are several pre-amp adapters available on the market at the moment. I’m a big fan of the PAC Audio AMP Pro 4 series which is also available for many GM, Toyota/Lexus and Ford models.
What is a pre-amp adapter exactly? Unlike a base model stereo, the audio signal coming from the back of your stock radio is digital. It’s just one’s and zero’s, data streaming until it reaches the stock amp. Think of that digital signal as a pre-amp audio signal. Once the signal reaches the stock amp it is converted to analog which is then output to your speakers. The stock amp also has built in crossovers and 9 individual channels for each driver unlike a traditional aftermarket amp.
Ideally, to upgrade the speakers and amp in your Jeep Wrangler JL, you want to intercept that audio signal before it hits the stock amp. That is exactly what these pre-amp adapters do. They catch the signal before it has been processed, while it is still clean, unadulterated and digital and then provides you with a way to connect an aftermarket amp and/or DSP processor to your stock stereo. You can either catch it while it is still digital and then keep it digital by utilizing an amp or DSP processor with Toslink connectivity OR you can convert it straight to analog RCA. This photo from PAC Audio illustrates it pretty well. In our Jeep we also used JL Audio’s TWK-88 for a DSP so that we have full equalization control and time alignment.
There are a few different pre-amp adapters on the market compatible with the Wrangler JL:
- PAC Audio AP4-CH41 – also available optional Toslink adapter which enables you to keep signal digital until it reaches your DSP processor amp (must have Toslink compatible DSP or Amp)
- iDatalink Maestro AR (compatible with select Audison and Kenwood digital amps)
- iDatalink Maestro DSR1
In our own 2019 Jeep Wrangler JL MOAB edition (Mojito Green), we used the PAC Audio AP4-CH41 and out of the 3 options listed, this is our preferred adapter. It’s a bit more flexible than the other two options. One cool thing about the PAC Audio piece is you don’t have to go the full DSP route. A lot of Jeepsters are do-it-your-selfers and may have skills for a head unit, speakers and amp install, but lack the knowledge and expertise to set up a 31 band EQ or the digital time alignment included with most DSP processors. You can use the AP4-CH41 just to get a nice clean 5 volt pre-amp signal so you can easily install a nice 5 channel amp, upgrade your speakers and add a sub. A DSP is optional with the PAC Audio adapter; it’s not required nor is it included.
Jeep Wrangler JL Stereo Upgrade – Why can’t you just use a basic line output converter?
Is the pre-amp adapter necessary? Can’t I just use a line output converter? For the premium sound models, no, you really need the pre-amp adapter to do it right. You can’t easily slap on a line output converter for a full system upgrade because you’d have to grab your audio signal AFTER the stock amp where it has already been converted and divided up into various frequency ranges for your stock sub, mid ranges and tweeters. This video from iDatalink actually explains really well why you don’t want to do it that way.
If you just wanted to add a sub to the stock system and you have the premium stock sound system, you can go the line output converter route and just grab your signal from the stock sub, but for a full system upgrade, you really want to go the pre-amp route.
Jeep Wrangler JL Stereo Upgrade – Speakers, amp, subwoofer and optional DSP processor
If you are familiar with my recommendations on the JK Jeep Wrangler Stereo Upgrade, then you’re already ahead of the game. Really the same rules still apply. In order to upgrade and really be able to enjoy the sound system in your Wrangler – top up or down – you need:
- Good, clean audio signal (either aftermarket head unit with high voltage RCA pre-amp OR pre-amp adapter with or without DSP processor)
- Quality speakers that can handle high power for the front and rear
- Subwoofer – preferably side mounted or down-firing so bass isn’t lost when top down
- High powered 5 channel amp to power new speakers and subwoofer
Jeep Wrangler JL Speakers – Sizes and location
Speaker placement in the Wrangler JL is the same as the previous JK models. You should have mid ranges against the dash pad, tweeters on the dash and component or coaxial in the sound bar.
However, looks can be deceiving. Although the grille sizes appear pretty similar to the JK body style, the speaker size has changed in the new Jeep Wrangler JL. Oddly enough, they have gone down in size.
The Jeep Wrangler JL is equipped with:
- 4″ components in front with an oversized tweeter (3.5″)
- 4″ components or coaxial in the rear sound bar (depending on whether yours is equipped with the 9 speaker premium sound system, 8 speaker system or the base 6 speaker)
Oh, and they are mounted in these cute little ported enclosures:
Only trouble with this size is you are kind of limited in options. There are not a lot of high power handling 4″ components on the market. Audison offers the Prima 4 series mid bass speakers and you can pair that with their AP1 tweeters and add a crossover for the fronts. However, for the money, I prefer Morel (I put a set of the BMW Prima speakers in my 2013 1 series and they’re not bad, but I will be swapping them out for Morel in the near future – they’re a little bright/harsh in comparison to Morel).
Morel has a couple options to choose from and they are both pretty freaking awesome. You really can’t go wrong with either model. The Morel Hybrid 402 Components and the Virtus 402 Components fit quite nicely. The first Wrangler JLU we worked on, we did actually install a set of 6.5″ components in the front and modified the housings. We had pulled these speakers out from his last Jeep not knowing what size would be in the JL. It was quite a tedious effort, but if there is a specific set of component speakers you want and they are not available in 4″, you really don’t have any other choice than to modify the housing.
If you have the 9 speaker premium sound set up, you would basically order two sets of these component speakers – one for the fronts and one for the rear sound bar. Now technically you don’t have to go with a matching component set in the rear sound bar, you could get away with installing a coaxial such as the Hybrid Integra 402 point source or even one of Morel’s other 4″ coaxial speakers such as the Tempo Ultra 4″ or even Maximo Ultra 4″. In our own Wrangler we went with the Hybrid series front and rear and they are truly fantastic. Morel specializes in speakers and they really do a phenomenal job. They are made in Israel and they are known for their incredible tweeter. It is silky smooth, detailed, articulate and vibrant, but never harsh. It it impeccable.
Jeep Wrangler JL Stereo Upgrade – Amp placement and recommendation
With your pre-amp adapter, you can technically install whatever amp or combination of amps you desire, but I can tell you what has worked well for our shop in countless Wranglers. This amp is what my husband John and I each have in our own Wranglers – the Alpine PDX-V9. I highly recommend it. I’ve used this amp in many high fidelity system installs. It really is an excellent value. It is a compact, high powered and great sounding 5 channel amp. It pushes out 100 watts RMS per channel to the interior speakers and 500 watts RMS to the subwoofer.
This is plenty of power output if you like it loud and clear cruising with the top down. Even on the highway with the top down, you will still be able to hear and enjoy your sound system with this powerful amp. If you are installing this with only the PAC Audio AP4-CH41, and you are not using any separate DSP processor, we recommend you also include their RUXKNOB2 bass knob so you can adjust the sub bass on the fly from song to song.
In most Jeep Wrangler stereo upgrades, we install the amp under the passenger seat. JL Audio has a couple install accessories that we used in our own Jeep Wrangler JL stereo upgrade that you may want to consider to make your install a little cleaner and easier. The part pictured above is an under seat amplifier mounting bracket for the passenger side and the part pictured below is a nice mounting bracket for your fuse holder.
Jeep Wrangler JL Stereo Upgrade Subwoofer Options
What about the bass? Thankfully, JL Audio is on top of the ball and they have already designed two different stealth box enclosures for the 4 door Wrangler JL. This vehicle specific stealth box is available for either passenger or driver side (or both) and features JL Audio’s 10″ TW1 shallow mount subwoofer.
I know not everyone has the $750 to shell out for a sub like this, but if you can swing it, go for it. This is the best way to add bass that doesn’t take up any room, is clean, tight, punchy and loud enough to hear over wind and road noise. Bonus – if you do buy this subwoofer you are also supporting American jobs. it’s made in America, right in Miramar, Florida (woofer and enclosure).
If you need a more budget friendly option and you’re working with the base 6 speaker system, you could consider using Alpine’s (made in China) PWE-S8 under seat amplified subwoofer. That is a great amplified subwoofer I have used in many Wrangler’s, but keep in mind it’s only 120 watts RMS so it’s pretty similar in output to what the stock premium subwoofer sounds like. It’s not nearly as powerful, deep or punchy as the JL Audio stealthbox, but it still makes for a nice improvement over the base 6 speaker system.
Jeep Wrangler JL Stereo Upgrade – DSP Processor – placement and recommendation
If you want fine tune control such as equalization controls, digital time alignment and easily adjustable crossover points, you’ll want to use a DSP processor with your installation. There are many DSP processors on the market. If you use the iDatalink AR you can use an Audison processor or you can use the DSR1 which has the Rockford processor built in. Our shop has tried many different brand processors on the market – Audison, Alpine, Rockford Fosgate, JBL, Audio Control, Helix, Metra, etc. Out of everything we’ve tried over the past 20 years, our favorite is still the JL Audio Twk-88. It just has the best sound quality and most versatility. Our only complaint is you do need a laptop to set it up. It would be nice if it could be adjusted through an app.
The Twk-88 comes with a DRC-205 which acts not only as your master volume control knob, but also your sub level control (it has an inner and outer ring) and your listening preset control. You can see in the pic above that we have ours mounted where an outlet used to be. When John and I are cruising together, he pushes the knob in and the color on the knob ring changes to indicate we’ve switched from listening preset number one (which he set up for him, the driver) to listening preset number two (which he set up for driver and passenger). I believe with the JL Twk-88 you can have up to 4 listening presets.
Jeep Wrangler JL Stereo Upgrade – Recommendations for non-amplified models
If your Jeep is equipped with the non amplified 5″, 7″ or 8.4″ screen, and you’re happy with the features of your radio and the user interface, you’re still going to want to do some type of DSP processor with your aftermarket amp and speakers. In these models, you can’t really eliminate the stock amp since it’s built into the radio. Anything you attach to your stock radio has to grab its signal after the amp. So you need a fancy line output converter to take that stock stereo analog signal and convert it into a nice clean pre-amp signal.
If you like the idea of the JL Audio Twk-88, that is still an option, but you’ll want to add their Fix-86 to it. The Fix-86 will take speaker level out from your factory radio, analyze it and clean it up so you have a nice clean, pre-amp signal to work with. Technically you could just use the Fix-86 on its own for a high quality, 6 channel line output converter (the fanciest and best on the market IMO). We have done many installs with the Twk-88 and Fix-86 and several installs with the Fix-86 alone. Whether alone or combined, these products always produce an extremely clean sounding solution for tacking an aftermarket amp on after the stock head unit. We never have any kind of background hiss at all which can be a common issue whenever adding an amp to a stock sound system. If you do opt for the Fix-86 on its own, be sure to add the DRC-205 control knob (not included).
Alternatively, another contender would be the more budget friendly Metra AX-DSP which utilizes a T-harness for installation. I have used the Metra AX-DSP in another vehicle and for the money, it’s a great way to tackle a full system upgrade – especially in a vehicle where you can’t or don’t want to change the head unit. One thing I did not like about it is in the previous car we tried this in, we did have a small background hiss which we could not eliminate. It was faint and only noticeable with the volume next to nothing, but still it was there. The install application was slightly different from the Wrangler JL in that it was in a Honda with a premium sound system. I have not tried the Metra AX-DSP in a non amplified vehicle, but I’m hoping it may work better in this type of application.
Jeep Wrangler JL Stereo Upgrade – Aftermarket Head Unit Options
If you have the base model, non amplified 5″ screen, you would probably prefer to replace the radio so that you can get better features like CarPlay and Android Auto. In all likelihood, such a head unit would also have a nice clean pre-amp output. However, as of this writing, Metra has not yet made a stereo installation dash kit for this vehicle, but I am sure they are working on it. Technically some of the wiring parts are available, so if you wanted to make a custom dash kit to install an aftermarket head unit, you could, but there are some limitations to be aware of.
Mounting depth is going to be an issue for any traditional aftermarket double din head unit. It’s probably only about 5″. The stock head unit is extremely shallow and there are vents behind it. I think one of the best options for head units currently on the market would be something like the Pioneer DMH-C2550NEX or DMH-C5500NEX. Both of these models utilize a modular system. The screen is a thin and shallow component and then there is a separate sub brain for the radio guts and pre-amp. Both of these models are also iDatalink Maestro compatible. Using the iDatalink Maestro RR and CH3 harness, you can retain functions like steering wheel controls, access to and ability to modify vehicle settings and on screen vehicle info like tire pressure monitoring, battery voltage and read/reset check engine codes. However, at the moment, it doesn’t look like there are any parts to retain the OEM reverse camera (which is most likely CAN bus activated like most Chrysler/Dodge/Jeep OEM cameras so may not be possible to try and cut and splice and trigger on your own). I’m sure a solution will be available soon for both the dash kit and reverse camera and once it’s available, I will update this post with new details.
Jeep Wrangler JL Stereo Upgrade – Limited options, but only for a limited time
The Jeep Wrangler is one of the most highly accessorized and popular vehicles on the road. It’s only going to be a matter of time until more products hit the market and more options become available. The Jeep Wrangler JL body style is still relatively new, so we are still somewhat limited in accessories and upgrades currently available. However, if you’re looking to upgrade the sound system in your Wrangler JL now, you still have some solid methods and solutions available and I hope you found this blog post helpful in exploring those options. I’m sure there will be many more product solutions in the near future. Until then, I hope this post has been informative to my fellow Wrangler JL owners out there. Please let me know what you think in the comment section below.